Outils pour utilisateurs

Outils du site


materiel:hp:hp_bladesystem_onboard_administrator

HP BladeSystem Onboard Administrator (OA)

Administration en ligne de commande

Se connecter en SSH sur le chassis

USER
login as: ADMIN ----------------------------------------------------------------------------- WARNING: This is a private system. Do not attempt to login unless you are an authorized user. Any authorized or unauthorized access and use may be moni- tored and can result in criminal or civil prosecution under applicable law. ----------------------------------------------------------------------------- Firmware Version: 4.50 Built: 07/24/2015 @ 04:06 OA Bay Number: 1 OA Role: Active ADMIN@10.154.27.29's password: HP BladeSystem Onboard Administrator (C) Copyright 2006-2015 Hewlett-Packard Development Company, L.P. Type 'HELP' to display a list of valid commands. Type 'HELP <command>' to display detailed information about a specific command. Type 'HELP HELP' to display more detailed information about the help system. CHMUZMAHDI18>

Se connecter à une lame

connect server <num_lame>

Changer adresse ILO blade à partir de OA

USER
# Vérifier l'adresse IP show /map1/enetport1/lanendpt1/ipendpt1 # Vérifier la gateway show /map1/gateway1 # Modifier l'adresse IP / Subnet set /map1/enetport1/lanendpt1/ipendpt1 IPv4Address=10.166.234.190 SubnetMask=255.255.254.0 >>>>>> ATTN : attente du reset ilo entre la modif @ip et la passerelle <<<<<<<< # Modifier la passerelle set /map1/gateway1 AccessInfo=10.166.234.1

Faire un RESET d'une lame

reset server <num_lame>

materiel/hp/hp_bladesystem_onboard_administrator.txt · Dernière modification : 2022/03/11 14:24 de 127.0.0.1