===== HP BladeSystem Onboard Administrator (OA) =====

**** Administration en ligne de commande

Se connecter en SSH sur le chassis
<konsole><nowiki>
login as: ADMIN

-----------------------------------------------------------------------------
WARNING: This is a private system.  Do not attempt to login unless you are an
authorized user.  Any authorized or unauthorized access and use may be moni-
tored and can result in criminal or civil prosecution under applicable law.
-----------------------------------------------------------------------------

Firmware Version: 4.50
Built: 07/24/2015 @ 04:06
OA Bay Number:  1
OA Role:       Active
ADMIN@10.154.27.29's password:


HP BladeSystem Onboard Administrator
(C) Copyright 2006-2015 Hewlett-Packard Development Company, L.P.


Type 'HELP' to display a list of valid commands.
Type 'HELP <command>' to display detailed information about a specific command.
Type 'HELP HELP' to display more detailed information about the help system.


CHMUZMAHDI18>
</nowiki></konsole>\\ 

==== Se connecter à une lame ====
<code>
connect server <num_lame>
</code>\\ 

==== Changer adresse ILO blade à partir de OA ====
<konsole><nowiki>
# Vérifier l'adresse IP
show /map1/enetport1/lanendpt1/ipendpt1

# Vérifier la gateway      
show /map1/gateway1                               

# Modifier l'adresse IP / Subnet
set /map1/enetport1/lanendpt1/ipendpt1 IPv4Address=10.166.234.190 SubnetMask=255.255.254.0

>>>>>>  ATTN : attente du reset ilo entre la modif @ip et la passerelle <<<<<<<<

# Modifier la passerelle
set /map1/gateway1 AccessInfo=10.166.234.1
</nowiki></konsole>\\ 

==== Faire un RESET d'une lame ====

<code>
reset server <num_lame>
</code>\\